EN 1092-1 PN 40 Type 11 Flange Dimension

ZHAO77JIE EN 1092-1 Dimension, Type 11

DN	Mating dimensions					Outside diameter of neck A	Flange thickness	Length		Neck diameters	Corner radii R₁	Neck thickness (see 5.6.1) S
	Outside diameter D	Diameter of bolt circle K	Diameter of bolt hole L	Bolting			Flange thickness	Length		Neck diameters
	Outside diameter D	Diameter of bolt circle K	Diameter of bolt hole L	Number	Size		C₂	H₂	H₃	N₁
10	90	60	14	4	M12	17.2	16	35	6	28	4	See Annex A
15	95	65	14	4	M12	21.3	16	38	6	32	4
20	105	75	14	4	M12	26.9	18	40	6	40	4
25	115	85	14	4	M12	33.7	18	40	6	46	4
32	140	100	18	4	M16	42.4	18	42	6	56	6
40	150	110	18	4	M16	48.3	18	45	7	64	6
50	165	125	18	4	M16	60.3	20	48	8	75	6
65	185	145	18	8	M16	76.1	22	52	10	90	6
80	200	160	18	8	M16	88.9	24	58	12	105	8
100	235	190	22	8	M20	114.3	24	65	12	134	8
125	270	220	26	8	M24	139.7	26	68	12	162	8
150	300	250	26	8	M24	168.3	28	75	12	192	10
200	375	320	30	12	M27	219.1	34	88	16	244	10
250	450	385	33	12	M30	273.0	38	105	18	306	12
300	515	450	33	16	M30	323.9	42	115	18	362	12
350	580	510	36	16	M33	355.6	46	125	20	408	12
400	660	585	39	16	M36	406.4	50	135	20	462	12
450	685	610	39	20	M36	457.0	57	135	20	500	12
500	755	670	42	20	M39	508.0	57	140	20	562	12
600	890	795	48	20	M45	610.0	72	150	20	666	12
700	b
800
900
1 000
1 200
1 400
1 600
a For flanges type 21 the outside hub diameter approximately corresponds to the outside pipe diameter and the nominal value dimensions A, N3 and R1 and their tolerances are included for guidance only. b Only mating dimensions fixed, see Annex J. c Use is limited up to DN 600. d To be specified by the purchaser.